Skip to main content

How to Search for Files

Run a keyword search, combine it with a project and filters, and get sharper results in File Search.

The fastest way to find a file in Core is a keyword search — here's how to run one.

  1. Open File Search from the main navigation.

  2. Click into the search bar. Type a filename, a character or production name, a tag, or any other descriptive keyword.

  3. (Optional) Use the project picker to focus on one project first. See Get sharper results: start with a project, below.

  4. Press Enter to run your search, or select a suggestion from the Suggestion Panel that drops down as you type.

  5. Review your results. If you're seeing too many (or too few) files, add a Filter to narrow things down, or see How to Use Filters.

Tip: Not finding what you expect? Check your Search Settings — by default Core searches filenames and tags, but you can turn on embedded metadata, File ID, or MD5 checksum to expand or refine your search, too. See How to Find Files by Filename, File ID, or Checksum.

Get sharper results: start with a project

Searching across every project you can access is handy when you're not sure where a file lives. But when you know the project, picking it first is the quickest way to cut through the noise. Choosing a project:

  • Limits your results to files in that project.

  • Narrows the sidebar folders to that project's structure.

  • Trims your filter options down to the values used in that project, so you're not scrolling past statuses, tags, or uploaders that would never match.

To start with a project:

  1. Select the project picker at the left of the search bar.

  2. Choose your project or library. With a long list, start typing its name to find it fast.

From there, combine the project with a keyword, a filter, or both. The table below is a quick guide to which one to reach for. Each method below assumes you've already chosen your project.

What you know

Try this

Roughly what the file is called or tagged

Project + keyword

What kind of file it is, but not its name

Project + filter

A bit of both, and you want the shortest possible list

Project + keyword + filter

The files you need are spread across several projects

Start in the Filters menu (see Search tips below)

Project + keyword

Best when you know roughly what a file is called or how it's tagged. For example, choose your series' project and search for key art to see only that show's key art, not every key art file across all your projects.

  1. Click into the search bar and type your keyword.

  2. Press Enter to run the search.

Your results now show only files in that project that match your keyword.

Project + filter

Best when you know what kind of file you need but not its name. For example, everything with an Approved status, all the video files, or everything a particular person uploaded to that project.

  1. Click into the search bar to open the Suggestion Panel.

  2. Pick a value under File Type, Status, or Uploader. Your results update straight away.

  3. Need a different kind of filter, like a tag? Select More filters to see the full list of filters available for that project.

Tip: Suggestion Panel slow to respond? Select Filters below the search bar instead, make your selections there, then select Apply.

Project + keyword + filter

The most precise search, and the one to use when you need a short, specific list. For example, in your feature's project, search for trailer, then filter to video files with an Approved status.

  1. Type your keyword in the search bar and press Enter.

  2. Click back into the search bar and add one or more filters from the Suggestion Panel, or select More filters for more options.

You can also do it the other way round: pick your filters first, then add a keyword. Either way, you'll end up with the same results.

Adjusting as you go

Each part of your search works independently, so you can fine-tune one piece without starting over:

  • Clear your keyword and your project and filters stay put.

  • Remove a filter and your keyword and project stay put.

  • Switching projects in the project picker clears your filters, so add them again once the new project is loaded (see Search tips below).

  • To start completely fresh, use Clear Everything at the top of the Suggestion Panel.

Search tips and optimizations

A few habits that save time and help you avoid having to start over.

Pick your project before your filters

The order you build your search in matters. If you add filters first and then choose a project from the project picker (or the sidebar), Core will ask you to clear your search and start again.

To avoid that, either:

  • Start with the project picker, then add your keyword and filters. This is the recommended order for most searches.

  • Keep your filters and add the project from the Filters menu. Select Filters below the search bar, open the Structure section, and choose your project there. Your existing filters stay in place.

Searching across multiple projects

Need files from more than one project, like character images across a multi-film franchise or every season of a series? Start with the Filters menu instead of the project picker.

  1. Select Filters below the search bar.

  2. If you see a Domain or Project Type option, narrow it first. This improves both search speed and your results.

  3. Open the Structure section and select each project you want to include.

  4. Add any other filters you need, such as File Type or tags.

  5. Select Apply.

  6. Add a keyword in the search bar if you want to narrow things further.

Note: At this time, filters only narrow dynamically when a single project is selected first. When you search across multiple projects, tags from all of those projects appear together in the filter list, so some tag combinations may return no results. Dynamic filtering across multiple projects is planned for a later release.

Rule out files by name

Want to leave out files with a particular word in their filename, like drafts or temp files? Add an exclusion to your keyword search.

  1. Click into the search bar to open the Suggestion Panel.

  2. Under Exclude, choose Doesn't Have.

  3. Type the word you want to leave out. It's added to your search as a minus-prefixed term (for example, -draft).

  4. Press Enter to run your search.

This only matches filenames, not tags or metadata. For example, search for key art and exclude draft to see only final key art files.

Note: Single words work best at the moment. Better support for phrases will be added later.

Tip: If a combined search comes back empty, loosen it one piece at a time. Drop a filter first, then try a broader keyword, and finally check that you've got the right project selected.

More filter tips

For more ways to get the most out of filters, including finding files with no status, see How to Use Filters.

Did this answer your question?